New
New
As an eBay Partner Network Affiliate, I earn from qualifying purchases.
| AI FIFO | 512 Bytes |
|---|---|
| Analog Inputs | 8 SE / 4 Differential |
| Analog Outputs | 2 Channels, 12-Bit |
| AO Drive Current | 5 mA Max |
| AO Output Range | 0 to +5 V |
| AO Update Rate | 150 Hz Software-Timed |
| Brand | Unbranded |
| Bus Interface | USB 2.0 Full-Speed |
| Compatible Part No. | 779026-01 / 193132-01 |
| Converter Type | Successive Approximation |
| Counter/Timer | 1 x 32-Bit, 5 MHz Max |
| Country/Region of Mfr. | Not Specified |
| Current Draw | 80 mA Typ / 500 mA Max |
| DAQ Module Type | Digital I/O |
| Digital I/O Lines | 12 (P0.0-7, P1.0-3) |
| DIO Logic Level | TTL / LVTTL / CMOS |
| DIO Output Type | Push-Pull / Open Drain |
| Driver Required | DAQ Driver Software |
| Features | Bus Powered, Plug & Play |
| Function | Analog & Digital DAQ I/O |
| I/O Connector | 2 x 16-Pin Terminal Block |
| Input Impedance | 144 kOhm |
| Input Range (Diff) | +/- 1 V to +/- 20 V |
| Input Range (Single) | +/- 10 V |
| Input Resolution | 14-Bit (Diff) / 13-Bit (SE) |
| Isolation | 30 V Ch-to-GND, CAT I |
| Max Sample Rate | 48 kS/s Aggregate |
| Model | National Instruments USB-6009 |
| MPN | USB-6009 |
| Number of Channels | 8 |
| Onboard Power Out | +5 V 200 mA / +2.5 V |
| Operating Humidity | 5-95% Noncondensing |
| Operating Temperature | 0 to 55 C |
| Overvoltage Protection | +/- 35 V |
| Power Source | USB Bus Powered |
| Screw Terminal Torque | 0.22-0.25 Nm |
| Software Support | Python, MATLAB, C, C# |
| Storage Temperature | -40 to 85 C |
| Supported OS | Windows 10 / 11 |
| Type | Multifunction USB DAQ Device |
| USB Bus Speed | 12 Mb/s |
| Wire Gauge | 16 to 28 AWG |
| Working Voltage | +/- 10 V |