METSEPM8240
Schneider Electric Power Energy Meter
Schneider Electric METSEPM8240
Power quality meter
PM8000
PM8240
PowerLogic
Energy Meter

Market segment Buildings large building cost management: billing: sub feeder Buildings small building network management: main incomer Buildings medium building network management: main incomer Buildings large building network management: main incomer Buildings large building network management: sub feeder Buildings multi-site network management: main incomer Buildings multi-site network management: sub feeder Data center network management: main incomer Data center network management: sub feeder Healthcare network management: main incomer Healthcare network management: sub feeder Industry network management: main incomer Industry network management: sub feeder Utility: sub feeder Power quality analysis EN 50160 2010 compliance report IEEE 519 2014 compliance report IEC 61000-4-30 class S power quality measurement up to the 63rd harmonic harmonic distortion waveform capture voltage sag and swell detection programmablity (logic and math functions) IEC 62586 power quality monitoring disturbance direction detection rapid voltage change Type of measurement Current Voltage Frequency Active and reactive power total Apparent power total Power factor total Active and reactive power per phase, rms Apparent power per phase, rms Power factor per phase, rms supply voltage 90...415 V AC 45...65 Hz +/- 10 % 110...415 V DC +/- 10 % Network Frequency 50 Hz 60 Hz Line Rated Current 1 A 5 A 10 A Poles description 3P + N 3P 1P + N Power Consumption in VA 16 VA 230 V AC Display Type Colour TFT LCD Display Resolution 320 x 240 pixels QVGA Sampling rate 256 samples/cycle Measurement current 50…10000 mA Analogue input type Voltage (impedance 5 MOhm) Current (impedance 0.3 mOhm) Measurement voltage 57…400 V AC 42...69 Hz between phase and neutral 100…690 V AC 42...69 Hz between phases Frequency measurement range 42…69 Hz Number of inputs 3 digital 30 V AC 3 digital 60 V DC Measurement accuracy Current +/- 0.1 % Voltage +/- 0.1 % Active energy +/- 0.2 % Accuracy class Class 0.2S active energy IEC 62053-22 Class 0.2 active energy ANSI C12.20 Class 0.2 active power IEC 61557-12 Class 0.5S reactive energy IEC 62053-24 Class 0.5 power factor IEC 61557-12 Class 0.2 voltage IEC 61557-12 Class 0.2 current IEC 61557-12 Information displayed Voltage Current Frequency Power Energy consumption Harmonic distortion Communication port protocol Modbus RTU 115 kbauds - 2-wire ION 115 kbauds - 2-wire DNP3 IEC 61850 Modbus TCP/IP Ethernet Modbus TCP/IP daisy chain 10/100 Mbit/s RSTP 801.1d 2004 Communication port support ETHERNET Screw terminal block RS485 Data recording Min/max of instantaneous values Waveform logs Sequence of event recording Time stamping Alarm logs Trending/forecasting Sag and swell logs Harmonics logs GPS synchronisation Data logs Event logs 50 data recorders Communication Service SMTP e-mail notification RSTP support NTP time synchronization DHCP PTP time synchronization Cybersecurity Enable/disable communication ports Password protection Syslog protocol support Robust security logs Port hardening Mounting Mode Flush-mounted Mounting support Framework Installation category III Safety Construction III400…690 V conforming to IEC 61010-1:ed. 3 III400…690 V conforming to EN 61010-1:ed. 3 III347…600 V conforming to UL 61010-1:ed. 3 III347…600 V conforming to CSA C22.2 No 61010-1:ed. 3 Standards IEC 61557-12 IEC 62052-11 IEC 62053-24 IEC 62053-22 IEEE 1588 IEC 62586-2 IEC 61326-1

Brand	Schneider Electric METSEPM8240
MPN	METSEPM8240

Schneider Electric METSEPM8240

Shipping

Specifications

Returns Accepted