About this item

SIMPLE - Use on any 20 Amp 120-volt circuit, natural/propane gas furnace, boiler, freezer. Works with all Generators, Inverter Battery Backup or Solar Power Systems that have a standard 20A Nema 5-20 Outlet.
EASY DIY - Pre-wired with 24" 12AWG (Gauge) Wire (rated at 20A), 4 Knockouts along with hardware install kit covers most installation types. Includes drywall anchors, concrete masonry screws, also sheet metal self drilling for installs directly on appliances.
HEAVY DUTY - Constructed from powder coated steel for weather resistance, the watertight plug cover protects power input from rain, snow, and freezing while not in use. NEMA 3R Rated Case for outdoor or indoor installation.
SAVE GAS - Power only what you need and use a smaller generator that sips gas! During a power outage, it can be quickly and safely switched to emergency power to provide power to your appliances in the house (gas or oil heating, lighting, refrigerators or freezers, computers & entertainment systems, water or sump pumps). Compatible with generators and house power systems in the United States, Canada.
SAFE - ETL Certified to meet UL Standards for transfer switches in the USA/Canada. Anyone who can start a Generator can use this! Stay Prepared for "The Next Storm"

Product Description

The Journeyman Pro HTS15, is one of the smallest & easiest to install transfer switches on the market. We believe its the best choice if you want a simple way to power one or two circuits, like for powering a Gas or Oil Furnace and emergency sump pumps.

🔌 To use simply plug a standard 20 amp extension cord into the power outlet on your generator and into the built-in plug on the transfer switch, Flip the switch from Main Line to Gen Plug and now your running your equipment off the generator, it's that easy!☺️
✔️ Safe and easy for anyone in the family to use, don’t go through another power outage without heat.
🔥 If you have the HTS15 installed only on your gas furnace, it would allow you to use a smaller generator that is quieter and uses less fuel. For example, most gas furnaces draw less than 500 Watts running, so a large generator won't be necessary. Everything will work as normal, Your thermostat will still turn your furnace on/off as it normally would after startup of your furnace you can plug lights & accessories into the generator while your house warms back up.
💪 Our transfer switch was designed to be used by the new inverter generators to power High Efficiency gas furnaces, we 100% Guarantee it will work with your setup and have yet to have one returned due to not being compatible with any equipment.
👌 The transfer switch comes all ready for install, with 18” of flexible conduit with 24" of 12AWG wiring, hardware kit and only (5 wires) to hook up! Our step by step installer guide makes it easy for anyone to install it themselves.

✔ The Professionals Choice! proven by Journeyman in the field, don't settle for anything else.

Operation Mode

ON-OFF-ON

Current Rating

20 Amps

Operating Voltage

120 Volts

Connector Type

Plug In

Brand

Journeyman-Pro

Item Dimensions LxWxH

3 x 4 x 5.5 inches

Actuator Type

Rotary

International Protection Rating

IP66

Number of Positions

3

Connectivity Protocol

X-10

Color

Grey/Silver

Wattage

2500 watts

Unit Count

1.0 Count

Product Dimensions

3 x 4 x 5.5 inches

Item Weight

1.75 pounds

Brand	Journeyman-Pro
Type	Manual
MPN	HTS15-MANv2

20A 120V ETL Certificated Manual Generator Transfer Switch w/ Circuit Breaker

Shipping

Specifications

Returns Accepted