ebay template

Quality Assurance

State & Local Government Ordering

Full Warranty & Support

When purchasing from AAATesters you will be eligible for Future Discounts

The Following Items Are Included:

Fluke 726 Precision Multifunction Process Calibrator (BC# 40138-L/T*)
(2) 1000V Hard Point Test Leads
User Manual On CD-ROM
Carrying Case (G)

BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!

This Item Has A Current Calibration!

Fluke 726 Precision Multifunction Process Calibrator

Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters

Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters

Integrated pressure switch test allows you to capture the set, reset and deadband of a switch

Power transmitters during test using 24 V loop supply and simultaneous mA measurement

Includes Carrying Case & Accessories As Listed Above!

Working Condition: Excellent
Condition: Refurbished
Calibrated: Yes
Warranty: 1 YEAR WARRANTY

Fluke 726 Precision Multifunction Process Calibrator

More Calibration Power! The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis.

Features:

More precise measurement and calibration source performance, accuracies of 0.01%.
Two separate channels; measure, source and view process signals simultaneously
Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
Measure or source pressure* using any of 29 Fluke 700Pxx Pressure Modules
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Integrated pressure switch test allows you to capture the set, reset and deadband of a switch
Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis
Transmitter error% calculation, interpret calibration results without a calculator
Perform fast linearity tests with auto step and auto ramp features
Power transmitters during test using 24 V loop supply and simultaneous mA measurement
Store frequently-used test setups for later use
Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation
Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement.
New voltage input protection design for improved reliability

Measurement Accuracy

Voltage DC

30.000 V	0.01%+ 2 mV (upper display)
20.000 V	0.01%+ 2 mV (lower display)
90.00 mV	0.01%+ 10μV
-10.00 mV to 75.00 mV	0.025 % + 1 count (via TC connector)

Current DC

24.000 mA

0.01%+ 2 mA

Resistance

0.0 to 4000.0 Ω

+/- 0.015%

Frequency

2.0 to 1000.0 CPM	0.05 % + 0.1 cpm
1.0 to 1000.0 Hz	0.05 % + 0.1 Hz
1.00 to 15.00 kHz	0.05 % + 0.01 kHz
Sensitivity	1 V peak-to-peak-minimum

Pressure

Accuracy	from 0.025% of range using any of 29 pressure modules.
	(for detailed specifications refer to pressure modules in options and accessories)
	Modules available for differential, gauge, vacuum, absolute, dual and high pressure.

Source Accuracy

Voltage DC

100.00 mV	0.01%+10 μV
20.000 V	0.01%+2 mV
-10.00 mV to 75.00 mV	0.025 % + 1 count (via TC connector)

Current DC

24.000 mA (Source)	0.01%+ 2 μA
24.000 mA (Simulate)	0.01%+ 2 μA

Resistance

Range, Accuracy (Percent of reading + floor) and Excitation Current	5 to 400 Ω, 0.015% + 0.1 Ω, 0.1 to 0.5mA
	5 to 400 Ω, 0.015% + 0.05 Ω, 0.5 to 3mA
	400 to 1500 Ω, 0.015% + 0.5 Ω, 0.05 to 0.8 mA
	1500 to 4000 Ω, 0.015% + 0.5 Ω, 0.05 to 0.4 mA

Frequency

2.0 to 1000.0 CPM	0.05%
1.0 to 1000.0 Hz	0.05%
1.0 to 10.0 kHz	0.25%
10.0 to 15.0 kHz	0.5%
Waveform:	5 V p-p squarewave, -0.1 V offset

RTDs and Thermocouples

Measure and Source Accuracy:

Cu10	1.8 °C
NI-120	0.15 °C
PT-100 (385)	0.45 °C
PT-100 (392)	0.35 °C
PT-100 (391-JIS)	0.35 °C
PT-200 (385)	0.95 °C
PT-500 (385)	0.55 °C
PT-1000 (385)	0.35 °C
RTD Resolution:	0.01 C (0.01 F)
Cu10.01 C	0.1 C (0.1 F)
J:	0.4 °C
K:	0.5 °C
T:	0.4 °C
E:	0.4 °C
R:	1.4 °C
S:	1.4 °C
B:	1.4 °C
L:	0.45 °C
U:	0.45 °C
N:	0.6 °C
XK:	0.4 °C
BP:	1.1 °C
TC Resolution	J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F

Specifications

Ramp Functions

Source functions:	Voltage, current, resistance, frequency, temperature
Ramps	Slow ramp, Fast ramp, 25% step-ramp

Loop Power Function

Voltage:	24 V
Accuracy:	10%
Maximum current:	22 mA, short circuit protected

Step Functions

Source functions:	Voltage, current, resistance, frequency, temperature
Steps	25% of range, 100% of range

Environmental Specifications

Operating Temperature

-10 °C to +55 °C

Storage Temperature

-20 °C to +71 °C

Operating Altitude

3000 m

Safety Specifications

Agency Approvals

EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992

Mechanical & General Specifications

Size

200mm x 96mm x 47mm (7.9 in x 3.8 in x 1.9 in)

Weight

650 g (23 oz.)

Batteries

4 AA alkaline batteries

Battery Replacement

Separate battery compartment, accessible without breaking calibration seall

Side port connections

Pressure module connector, also used for remote real-time programming

For full Fluke 726 product specifications, please click here: Fluke 726

Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet.

Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!

We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!

We Ship World Wide!

We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".

Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.

We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.

We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.

Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale.

Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections)

A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment.