NI PXI-1045 W PXI-1045, PXI-8174, PXI-8212, PXI-6508, PXI-6704, Q=6 PXI-6031E

This is a NI PXI-1045 W PXI-1045, PXI-8174, PXI-8212, PXI-6508, PXI-6704, Q=6 PXI-6031E.

What you will get:

NI PXI-1045 W PXI-1045, PXI-8174, PXI-8212, PXI-6508, PXI-6704, Q=6 PXI-6031E Including:
- 1 National Instruments NI PXI-1045 18-Slot, Universal AC PXI Chassis
- 1 National Instruments PXI-8174 Embedded Controller
- 1 National Instruments PXI-8212 GPIB & Ethernet Interface
- 1 National Instruments PXI-6508 Digital I/O DAQ Module, 96-Channel, 5V TTL
- 1 National Instruments PXI-6704 Analog Output
- 6 National Instruments PXI-6031E Multifunction I/O

This is my item 25WR1S3 N/D 3298 N/D 3241. 2 were available at listing time.

Check out my other items where I have a lot of other scientific equipment and accessories for sale.

More Information:

National Instruments NI PXI-1045 18-Slot, Universal AC PXI Chassis
The PXI-1045 Is designed for a wide range of test and measurement applications. By programmatically configuring the trigger routing modules on the chassis backplane, you can route triggers between devices with ease. It also features an extended temperature range, two external reference clock BNC connectors, and a removable, high-performance power supply with universal AC input.

National Instruments PXI-8174 Embedded Controller
The PXI-8174 is a legacy, Intel-based embedded computer controller manufactured by National Instruments (NI). It is designed to slide directly into a standard 3U PXI or CompactPCI system chassis to serve as the main processing unit for automated test, measurement, and data acquisition hardware.

Core Technical Specifications
Processor: Intel Celeron running at 566 MHz.Memory: Typically configured with 64 MB to 512 MB of 133 MHz SDRAM.
Storage Support: Features an internal 2.5-inch IDE hard drive (typically 10 GB to 40 GB) and a built-in 1.44 MB floppy disk drive.
Slot Footprint: Consumes 1 standard PXI system slot and requires 2 to 3 expansion slots to its left depending on the chassis model

National Instruments PXI-8212 GPIB & Ethernet Interface
The PXI-8212 is a legacy, single-slot multi-interface hardware module developed by National Instruments (NI). It is a dual-function expansion peripheral designed to be inserted into a standard 3U PXI or CompactPCI system chassis to provide both instrument control and network communication capability simultaneously.

Core Technical Specifications
By integrating two primary communication controllers onto a single board, the PXI-8212 eliminates the need to use separate slots for networking and instrument interfacing:
1. GPIB (IEEE 488) Interface: Equipped with the custom NI TNT4882C ASIC microchip. This allows full instrument control functionality (Controller, Talker, Listener) and utilizes the high-speed HS488 protocol to achieve maximum data transfer rates of up to 8 MB/s.2. Fast Ethernet Network Port: Integrated with an industry-standard network processor fully compliant with IEEE 802.3u. It provides automated standard base data rates of 10 Mbps (10BaseT) and 100 Mbps (100BaseTX) through a standard RJ-45 connection.
Power Consumption: Requires a maximum current load of 2 Amps at +5 VDC, pulling a maximum total of 10 Watts from the chassis backplane.
Driver and Software Support
GPIB Stack: Managed primarily through standard National Instruments NI-488.2 driver software core layers.
Operating System Requirements: This module was introduced during the Windows 98, Windows Me, Windows NT 4.0, and Windows 2000 hardware era. While basic native Ethernet functions may register on slightly newer legacy platforms, it is considered End-of-Life (EOL) and is unsupported on modern 64-bit platforms like Windows 10 or Windows 11.

National Instruments PXI-6508 Digital I/O DAQ Module, 96-Channel, 5V TTL
The PXI-6508 is a legacy 96-channel parallel digital input/output (DIO) hardware module manufactured by National Instruments (NI).

It is designed as a single-slot plug-in card for standard 3U PXI or CompactPCI system chassis to interface automated test systems with external 5V digital devices.
Core Technical Specifications
The module relies on specialized parallel port architecture to handle high-density industrial switching and sensing:
Channel Density: Features 96 static, bidirectional digital I/O lines.
Logic Level Compatibility: Configured for standard 5 V TTL/CMOS signal ranges (Logic Low: 0V; Logic High: 5V).Current Drive: Provides a single-ended current capacity of 2.5 mA per channel.

Core Hardware Chips: Equipped with four integrated 82C55 Parallel Port Interfaces (PPIs). Each individual PPI manages 24 bits of digital I/O split across three independent 8-bit ports (Ports A, B, and C).
Handshaking Capabilities: Port C can be software-configured to execute standard 2-wire data handshaking protocol configurations (interfacing seamlessly with peripheral equipment or external computers).
Power-Up State Control: Features onboard 100 kO pull-up resistors on each signal line, allowing users to safely define whether the hardware lines initialize in a known High or Low logic state during system boot-up to prevent accidental equipment triggers.I/O Connector:
Built with a dense, front-facing 100-pin female 0.050-series D-type connector.

National Instruments PXI-6704 Analog Output
The PXI-6704 is a 16-bit, 32-channel static analog output hardware module engineered by National Instruments (NI). It installs into a single slot of a standard 3U PXI or CompactPCI system chassis to provide software-timed voltage and current signals for automated industrial control and testing.

Core Technical Specifications
Unlike standard analog cards that only output voltage, the PXI-6704 provides independent, concurrent voltage and current capabilities
Output Channels: Features 32 total analog output channels split evenly across two distinct configurations:16 Voltage Channels: Capable of independent bipolar adjustments ranging from -10.1 V to +10.1 V.16 Current Channels: Capable of sourcing unipolar currents ranging from 0.1 mA to 20.2 mA (configured primarily for industrial 4–20 mA current loops; it does not sink current).

Resolution: Configured with a highly precise 16-bit digital-to-analog converter (DAC) architecture.Multiplexed Architecture: Uses a single high-performance 16-bit DAC that is time-division multiplexed across all output lines, paired with dedicated track-and-hold circuits to sustain steady levels between system updates.Digital I/O Lines: Incorporates eight 5V TTL/CMOS digital input/output lines on the board for secondary component switching and signaling.I/O Pin Connector: Utilizes a dense front panel 68-pin SCSI female D-type connector interface.

National Instruments PXI-6031E Multifunction I/O
The PXI-6031E is a legacy, high-density E Series multifunction data acquisition (DAQ) module manufactured by National Instruments (NI). It functions as a single-slot card that slides into a standard 3U PXI or CompactPCI system chassis to provide high-precision analog measuring, digital interfaces, and timing I/O for automated testing.

Core Technical Specifications
The primary benefit of the PXI-6031E is its massive analog channel distribution, allowing systems to manage complex arrays of low-frequency sensors without requiring additional standalone signal-switching hardware:

Analog Inputs: Features 64 single-ended or 32 differential analog input channels.

Resolution & Sampling Rate: Offers highly precise 16-bit resolution running at a maximum sampling speed of 100 kS/s.

Voltage Ranges: Supports 14 software-selectable input ranges spanning from ±0.1 V up to ±10 V with a maximum safe continuous working voltage limit of ±11 V.

Analog Outputs: Built with 2 independent 16-bit voltage output channels updated at up to 100 kS/s.

Digital I/O Lines: Includes 8 bidirectional digital lines operating at 5V TTL/CMOS logic levels.

Counters & Timers: Equipped with two 24-bit counter/timer channels controlled by internal 20 MHz and 100 kHz reference clocks.

Front Connector Interface: Utilizes a high-density, proprietary 100-pin female 0.050 D-type connector to route all available hardware channels.

Please use the shipping calculator to determine shipping.

Check out my other items!

If you receive your item and it is not to your 100 Percent Satisfaction, please contact us before leaving feedback.

I strive to make sure every transaction is a positive one!

IF you have a problem with my item, I would like you to use the "Contact Seller" link in the listing, or call me. Please don't open a case. Cases count against me even if they are resolved.

I stand behind my items and will work out any problems that you may have with an item.

So please contact me if you have a problem with an item I have sold you and don't use the eBay Case as a means of communication.

International Buyers, Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as "gifts". US and International government regulations prohibit such behavior.

Powered by SixBit's eCommerce Solution

NI PXI-1045 W PXI-1045, PXI-8174, PXI-8212, PXI-6508, PXI-6704, Q=6 PXI-6031E

Specifications

Returns Accepted