TITLE

150-A35NBD Allen-Bradley SMC Plus 35A Soft Starter w/ 592-BOV16

CONDITION

Used industrial surplus. This equipment was working when removed from service but has not been fully load-tested since removal. The components show normal cosmetic wear, dust, scratches, terminal marks, mounting wear, and identification markings from previous installation. Please review all photographs carefully for the exact condition.

DESCRIPTION

Allen-Bradley SMC Plus smart motor controller/solid-state soft starter, catalog number 150-A35NBD, Series B.

Also included are an Allen-Bradley 592-BOV16 Series B three-pole manual-reset thermal overload relay and a mechanical external-reset shaft/bracket assembly.

The SMC Plus controller is rated for three-phase 208–480 VAC operation with a continuous-current rating of 35 amps. Maximum nameplate motor ratings are 10 HP at 200/230 VAC and 25 HP at 460 VAC. Control voltage is 120/240 VAC.

The included 592-BOV16 overload relay has a maximum continuous-current rating of 40 amps. Actual motor-overload protection is determined by the installed Type W heater elements. Heater-element numbers and current ranges have not been verified. Buyer is responsible for confirming the proper heater elements, motor full-load current, control voltage, wiring, physical fit, and complete application compatibility before installation.

This is an Allen-Bradley industrial controller intended primarily as a replacement or spare for compatible existing machinery.

FEATURES

- Allen-Bradley SMC Plus smart motor controller

- Solid-state reduced-voltage motor starting

- Soft-start and current-limit functionality

- Energy-saver and controlled-stopping functions

- Running, starting, stopping, fault, stall, temperature, and line indicators

- 35-amp continuous-current rating

- Up to 25 HP at 460 VAC

- Three-phase 208–480 VAC input

- 120/240 VAC control voltage

- Form C/SPDT auxiliary contact

- Heavy aluminum heat sink

- Panel-mount/open-chassis construction

- Included three-pole thermal overload relay

- Included mechanical external-reset linkage

SPECIFICATIONS

Brand: Allen-Bradley

Main Controller Model: SMC Plus

Main Controller MPN: 150-A35NBD

Main Controller Series: Series B

Controller Type: Smart Motor Controller / Solid-State Soft Starter

Rated Current: 35 A Continuous

Input Voltage: 208–480 VAC

Input Phase: Three-Phase

Input Frequency: 47–63 Hz

Control Voltage: 120/240 VAC

Maximum Motor Rating at 200 VAC: 10 HP

Maximum Motor Rating at 230 VAC: 10 HP

Maximum Motor Rating at 460 VAC: 25 HP

Auxiliary Contact: Form C/SPDT

Additional Controller Marking: 40888-313-51

Overload Relay Brand: Allen-Bradley

Overload Relay MPN: 592-BOV16

Overload Relay Series: Series B

Overload Relay Type: Three-Pole Eutectic-Alloy Thermal Overload Relay

Overload Relay Maximum Continuous Current: 40 A

Overload Relay Reset: Manual

Overload Relay Contact: One Normally Closed Contact

Overload Control-Circuit Rating: 120–600 VAC, NEMA A600

Country of Manufacture: United States

INCLUDED ITEMS

- One Allen-Bradley 150-A35NBD Series B SMC Plus smart motor controller/soft starter

- One Allen-Bradley 592-BOV16 Series B three-pole manual-reset overload relay

- One mechanical external-reset shaft and bracket assembly

Only the components shown in the photographs are included. No enclosure, motor, bypass contactor, wiring, cables, manuals, mounting hardware, or additional accessories are included unless specifically pictured.

HEATER-ELEMENT NOTICE

The 592-BOV16 is an overload-relay frame. Its actual trip/current range depends on the installed Type W heater elements. The heater-element model numbers and current ratings have not been identified or verified. Buyer must confirm that the installed heaters are present and properly sized for the intended motor before operation.

SHIPPING INFORMATION

The components will be carefully packed with rigid protection around the terminal blocks, relay, reset linkage, and aluminum heat sink. The package will be shipped by USPS Ground or UPS Ground with tracking and insurance.

A physical street address may be required. Please contact us before purchasing if delivery to a PO box is necessary.

RETURN INFORMATION

Thirty-day returns are accepted. Buyer pays return shipping.

The controller, overload relay, and reset linkage must be returned together, in the same condition, and with the same identification markings. Damage caused by incorrect wiring, improper voltage, unsuitable heater elements, installation error, incompatible equipment, unauthorized disassembly, or misuse is not covered.

IMPORTANT INSTALLATION NOTICE

Installation and testing should be performed only by qualified industrial electrical personnel. Hazardous line and control voltages may be present. Always disconnect and verify power before servicing. Buyer is responsible for confirming the complete catalog numbers, motor current, heater-element selection, control voltage, wiring configuration, and application requirements before energizing the equipment.

Brand	Allen-Bradley
Rated Load	25 HP
Model	150-A35NBD

150-A35NBD Allen-Bradley SMC Plus 35A 25HP 480V Soft Starter Series B

Specifications