New with box.

WH22X37840 Washer Main Control Board Replacement for GE Front Load Washers

【Direct Replacement】WH22X37840 main control board is designed as a replacement for GE front load washer systems, restoring reliable electronic control performance.This main control board is a direct replacement for part numbers AP7201202, PS16762525，AP7245609, WH22X36637, WH22X35517, WH22X34659, WH22X30898, WH22X29532, WH22X32057, WH22X32457, WH22X36857 and WH22X37839.
【Function Control】As the control center of the washer, wh22x37840 control board coordinates electronic signals between the user interface, water valve, motor, drain pump, and sensors. It helps manage wash cycles, water levels, motor operation, spin speed, timing, and system communication for consistent washer performance.
【Restore Essential Washer Functions】A faulty control board may cause startup failure, unresponsive controls, incorrect cycles, interrupted operation, or abnormal washer behavior. This replacement control module helps restore essential electronic functions and supports normal washing, rinsing, and spinning operations.
【Compatibility】Designed for GE front load washer models, including GFW650, GFW655, GFW850, PFW870, PFW950, and PFW955 series. Compatible model include GFW650SPN0SN, GFW650SSN0WW, GFW655SPV0DS, GFW655SSV0WW, GFW850SPN0RS, GFW850SSN0WW, PFW870SPV0RS, PFW950SPT0DS, PFW955SPW0DS and more. Please verify your complete model number and original board before ordering.
【Programming Steps】After replacing WH22X37840, if all the LED lights are flashing, it will enter the programming mode: 1. Press the Start button once to stop the flashing and display the initial ID; 2. Press the Start button repeatedly to cycle through the Personality IDs until the correct code for the corresponding model is displayed; 3. Press the Start button for 3 seconds to save, and the main control board will enter the standby state.Model and corresponding ID： GFW650 series → 3， GFW655 series → 9， GFW850 series → 4， PFW870 series → 10， PFW950 series → 6， PFW955 series → 1
【 Field Service Mode Reset Instructions】If the programming fails or the LED lights do not flash after replacement, you need to enter the on-site service mode to reset: 1. Press and hold the Start button, and rotate the program selection knob 180 degrees simultaneously to enter the Field Service Mode; 2. Rotate the knob (clockwise/counterclockwise) to switch the test number; 3. Press the Start button to execute the current test; 4. If you select Test 17, you can re-set and write in the correct Personality ID.

WH22X37840 Washer Main Control Board Replacement for GE Front Load Washers

Shipping

Specifications

Returns Accepted